The DMM Triple Attachment Pulley combines the high efficiency of our pulleys with a small three hole rigging plate to give an extremely versatile piece of equipment. It can obviously be used as a standard pulley, but the additional holes allow it to be guided or controlled without adding any complication into the system.
All the edges are rope and textile friendly allowing direct attachment that minimizes bulk and maximizes versatility.
Pre-lubricated Oilite bushing give minimal efficiency losses and minimal maintenance requirements.
An integral part of the DMM/Teufelberger ‘Hitch Climber’ set up developed in conjunction with Treemagineers.
|FINAL SALE ITEM||No|
|CERTIFICATIONS OR STANDARDS||EN12278:2007; NFPA 1983 (2012 Edition) Class T|
|INNER DIAMETER||3/5in holes|
|MEETS ANSI STANDARDS||Yes|
|TENSILE STRENGTH||6,744 lbs ( 29.9 kN )|
|WORKING LOAD LIMIT||674 lbs (3 kN)|